MakerFocus LoRa Radio Module Based on the ATmega328P, 433 MHz RFM98 2.4G Wireless Node Built-in Antenna IOT Development Board for Arduino
MakerFocus LoRa Radio Module Based on the ATmega328P, 433 MHz RFM98 2.4G Wireless Node Built-in Antenna IOT Development Board for Arduino by MakerFocus at AABX. MPN: 4335283489. Hurry! Limited time offer. Offer valid only while supplies last. The LoRa Radio Node v1.0 based on the ATmega328P and RFM98 433Mhz radio module. The main chip ATmega328P clocked at 8 MHz and at 3.3V logic, which
On board with a 3.7V 14500 2800mAh battery holder, so it can use anywhere you like. In this LoRa Radio Node, we break out 2 IIC ports, 2 analog port (A0 A1) and 2 digital port (D3 D4) with 4 pin and 3 pin 2510-I type header.
Size: 40mm x 60mm
ATmega328P 8MHz with 3.3V logic/power
3.3V regulator with 500mA peak current output
Hardware Serial, hardware I2C, hardware SPI support
1 x PWM pins: D3
12 x analog inputs: A0 A1
Pin 13 BLUE LED for general purpose blinking
2 mounting holes
This LoRa Radio Node uses the extra space left over to add an RFM9x LoRa 433 MHz radio module. These radios are not good for transmitting audio or video, but they do work quite well for small data packet transmission when you need more range than 2.4 GHz (BT, BLE, WiFi, ZigBee).
SX1278 LoRaandreg; based module with SPI interface
Packet radio with ready-to-go Arduino libraries
Uses the amateur or license-free ISM band: ITU "Europe" license-free ISM or ITU "American" amateur (with amateur band limitations)
+5 to +20 dBm up to 100 mW Power Output Capability (power output selectable in software)
~300uA during full sleep, ~120mA peak during +20dBm transmit, ~40mA during active radio listening.
Simple wire antenna or spot for uFL connector
1 * LoRa Radio Node v1.0with attenna
Features & Highlights
- Document Link: https://github.com/IOT-MCU
- The LoRa Radio Node v1.0 based on the ATmega328P and RFM98 433Mhz radio module; The main chip ATmega328P clocked at 8 MHz and at 3.3V logic, which use the Arduino pro mini 8Mhz 3.3V bootloader, usage same as the Arduino pro mini. This chip has 32K of flash and 2K of RAM.
- Power supply: 3.7V 14500 2800mAh Lipo battery Or 3.7-12V DC power(VCC GND: 2PIN 2510-I Type connect). Please note: the battery is not include!
- We Have a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click "MakerFocus" and click "Ask a question" to email us! Looking forward to your consultation!
|Item Weight:||0.01 pounds|
|Item Size:||2.36 x 0.39 x 0.39 inches|
|Package Weight:||0.06 pounds|
|Package Size:||2.87 x 1.02 x 1.02 inches|