Wireless Module Board, Wireless DMX512 Transceiver PCB Module Board LED Controller Transmitter Receiver with Antenna
Huge Savings Item! Save 14% on the Wireless Module Board, Wireless DMX512 Transceiver PCB Module Board LED Controller Transmitter Receiver with Antenna by Estink at AABX. Hurry! Limited time offer. Offer valid only while supplies last. Operating manual: ID code and LED color corresponding correlation: 1:RED 2:GREEN 3:RED+GREEN = YELLOW 4:BLUE 5:RED+BLUE = PURPLE 6:GREEN+BLUE = CYAN
ID code and LED color corresponding correlation:
3:RED+GREEN = YELLOW
5:RED+BLUE = PURPLE
6:GREEN+BLUE = CYAN
7:RED+GREED+BLUE = WHITE
Press key 1 time to indicate ID setting, Press again to set IC, then ID value adding 1 each time by press.
LED constant light up: no DMX or wireless signal.
Red LED flash: transmitting.
Green LED flash: Receiving
RF frequency------2. 400-2. 525 G, total 126 channels, it is searching automatically.
ID Code-------"1-7" groups ID code, press "key" button for setting, it only can work under same ID code of transmitter and receiver.
Power on DMX512 wireless received board and transmitted board.
Press "key" button to set same ID value of transmitted board and received board, please use different ID value if you need use more than 1 group wireless net at same time in same place.
The red LED flashes when transmitter transmits DMX data by no interfered frequency section, then receiver changes communicated frequency section. Green LED flash till received corrected same ID value, LED flash faster once DMX data faster.
Communication was established correctly then.
1 x Wireless DMX512 PCB Modules Board LED Controller Transmitter Receiver
Features & Highlights
- 【EASY OPERATION】Small in size easy to suit for interior of accessed lighting. Single key to operate, tricolor LED displaying.
- 【FUNCTION】Transmitting standard DMX512 protocol data of controller, also can transmit lighting and lighting DMX512 protocol data.
- 【NUMEROUS CHANNELS】126 channels automatically jumping frequency, high anti-jamming ability to ensure working reliability. 7 groups ID code settable, user can use 7 groups individual wireless system without any interference with each other in the same place.
- 【DETAILS INFO】Input voltage: 5VDC, Work frequency section: 2.4GHz ISM band, 126 channels frequency section.
- 【SENSITIVE & HIGH SPEED】Max transmitting power rate: 20dBm. Receiver sensitive: -94dBm. Signal port: RS485 or CPU series port AURT.
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Estink, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: HSV560, ean: 0785197262539,
HDMI USB KVM Extender with Lossless and No Latency 60m KVM Extender Over Single Cat5e/6 UTP Cable HDMI USB KVM Extender by rj45 Introduction： This HDMI USB KVM Extender device can extend FULL HD HDMI signal up to 100 meters via a single CAT cable, ...
mpn: 4328613027, ean: 0889284574755,
.Protection grade:IP 63,good waterproof,sun proof,lightning proof,cold proof; .Our own intellectual properties,easy to use and warranty; .2.3~2.7GHz,is different than other outdoor CPE,have anti-interference performance.2.3-2.7GHz Frequency Range,hav...
By Ubiquiti Networks
mpn: ROCKETM5-US, ean: 0093117581463,
Ubiquiti Rocket M5 AirMax: US Version The Rocket is a rugged, hi-power, very linear 2x2 MIMO radio with enhanced receiver performance. It features incredible range performance (50+km) and breakthrough speed (150+Mbps real TCPI/IP). The device was spe...
mpn: K4-B1, ean: 4853125719632,
1.TV Screen: After connected all port well, then TV will show screen with SSID, PSK, IP Address.(ports including: USB charger port,HDMI Port,external antenna port). Below Screen, it will show waiting for connection. please ignore it. 2.Device do not ...
Using this module for your next Interet of Things project, home automation, or remote sensor project. This module adats the ESP8226 IC for use over a serial connection using simple AT commands. No SPI interface or Know-How is required. Specification...
By Luabby Smart
mpn: LORA1276, ean: 6191650337685,
Lora1276 long distance wireless transceiver module integrates Semtech RF transceiver chip SX1276, which adopts LoRa TM Spread Spectrummodulation frequency hopping technique. The features of long distance and high sensitivity (-139dBm) make this modu...
mpn: TEW-730APO, ean: 0710931160673,
TRENDnet's 9 dBi Outdoor PoE Access Point, model TEW-730APO, provides wireless N300 (2.4 GHz) building-to-building connectivity. It supports Fat AP, Thin AP, Virtual Access Control (controls compatible Thin AP devices), and Virtual AC + Thin AP modes...
By Luabby Smart
RF2401F20 Module is a high integrated wireless module,which worked in 2.4GHz of ISM band. RF2401F20 adopts Nordic's RF chip nRF24L01+ and high efficiency RF amplifier.The feature of high data rate (maximum 2Mbps ), good sensitivity （-102 dBm） and...
mpn: 7011046, ean: 0611029133794,
This SIM800l module has a set of TTL level serial interface, a set of power supply interface. Besides, there are a set of antenna interface on this module. The chip of SIM800L basic features SIM800H is a complete Quad-band GSM/GPRS solution in a LGA ...
mpn: ASF-GE-T(Cisco-1pc), ean: 0603149400764,
Compatible Cisco P/N: GLC-T/SFP-GE-T 1000BASE-T SFP transceiver module for Category 5 copper wire, RJ-45 connector Data Rate: 1.25Gb/s Reach: 100m Fiber Type:CAT5 DDM/DOM: No Temp. Range(℃):0~70 Application Catalyst Express 500 Metro Ethernet Cata...